On this page:
5.1 Profiles
5.1.1 On-demand Profiles
5.1.2 Persistent Profiles
5.2 Experiments
5.2.1 Extending Experiments
5.3 Projects
5.4 Virtual Machines
5.5 Physical Machines
2016-10-03 (95fb490)

5 Basic Concepts

This chapter covers the basic concepts that you’ll need to understand in order to use PhantomNet.

5.1 Profiles

A profile encapsulates everything needed to run an experiment. It consists of two main parts: a description of the resources (hardware, storage, network, etc.) needed to run the experiment, and the software artifacts that run on those resources.

The resource specification is in the RSpec format. The RSpec describes an entire topology: this includes the nodes (hosts) that the software will run on, the storage that they are attached to, and the network that connects them. The nodes may be virtual machines or physical servers. The RSpec can specify the properties of these nodes, such as how much RAM they should have, how many cores, etc., or can directly reference a specific class of hardware available in one of PhantomNet’s clusters. The network topology can include point to point links, LANs, etc. and may be either built from Ethernet or Infiniband.

The primary way that software is associated with a profile are through disk images. A disk image (often just called an “image”) is a block-level snapshot of the contents of a real or virtual disk—and it can be loaded onto either. A disk image in PhantomNet typically has an installation of a full operating system on it, plus additional packages, research software, data files, etc. that comprise the software environment of the profile. Each node in the RSpec is associated with a disk image, which it boots from; more than one node in a given profile may reference the same disk image, and more than one profile may use the same disk image as well.

Profiles come from two sources: some are provided by PhantomNet itself; these tend to be standard installations of popular operating systems and software stacks. Profiles may also be provided by PhantomNet’s users, as a way for communities to share research artifacts.

5.1.1 On-demand Profiles

Profiles in PhantomNet may be on-demand profiles, which means that they are designed to be instantiated for a relatively short period of time (hours or days). Each person instantiating the profile gets their own experiment, so everyone using the profile is doing so independently on their own set of resources.

5.1.2 Persistent Profiles

PhantomNet also supports persistent profiles, which are longer-lived (weeks or months) and are set up to be shared by multiple users. A persistent profile can be thought of as a “testbed within a testbed”—a testbed facility built on top of PhantomNet’s hardware and provisioning capabilities. Examples of persistent profiles include:

A persistent profile may offer its own user interface, and its users may not necessarily be aware that they are using PhantomNet. For example, a cloud-style profile might directly offer its own API for provisioning virtual machines. Or, an HPC-style persistent profile might run a standard cluster scheduler, which users interact with rather than the PhantomNet website.

5.2 Experiments

See the chapter on repeatability for more information on repeatable experimentation in PhantomNet.

An experiment is an instantiation of a profile. An experiment uses resources, virtual or physical, on one or more of the clusters that PhantomNet has access to. In most cases, the resources used by an experiment are devoted to the individual use of the user who instantiates the experiment. This means that no one else has an account, access to the filesystems, etc. In the case of experiments using solely physical machines, this also means strong performance isolation from all other PhantomNet users. (The exceptions to this rule are persistent profiles, which may offer resources to many users.)

Running experiments on PhantomNet consume real resources, which are limited. We ask that you be careful about not holding on to experiments when you are not actively using them. If you are are holding on to experiments because getting your working environment set up takes time, consider creating a profile.

There are planned features relating to this section: see "Persistent Storage" for more details.

The contents of local disk on nodes in an experiment are considered ephemeralthat is, when the experiment ends (either by being explicitly terminated by the user or expiring), the contents of the disk are lost. So, you should copy important data off before the experiment ends. A simple way to do this is through scp or sftp. You may also create a profile, which captures the contents of the disk in a disk image.

All experiments have an expiration time. By default, the expiration time is short (a few hours), but users can use the “Extend” button on the experiment page to request an extension. A request for an extension must be accompanied by a short description that explains the reason for requesting an extension, which will be reviewed by PhantomNet staff. You will receive email a few hours before your experiment expires reminding you to copy your data off or request an extension.

5.2.1 Extending Experiments

If you need more time to run an experiment, you may use the “extend” button on the experiment’s page. You will be presented with a dialog that allows you to select how much longer you need the experiment. Longer time periods require more extensive appoval processes. Short extensions are auto-approved, while longer ones require the intervention of PhantomNet staff or, in the case of indefinite extensions, the steering commitee.

screenshots/apt/extend-experiment.png

5.3 Projects

Users are grouped into projects. A project is, roughly speaking, a group of people working together on a common research or educational goal. This may be people in a particular research lab, a distributed set of collaborators, instructors and students in a class, etc.

A project is headed by a project leader. We require that project leaders be faculty, senior research staff, or others in an authoritative position. This is because we trust the project leader to approve other members into the project, ultimately making them responsible for the conduct of the users they approve. If PhantomNet staff have questions about a project’s activities, its use of resources, etc., these questions will be directed to the project leader. Some project leaders run a lot of experiments themselves, while some choose to approve accounts for others in the project, who run most of the experiments. Either style works just fine in PhantomNet.

Permissions for some operations / objects depend on the project that they belong to. Currently, the only such permission is the ability to make a profile visible onto to the owning project. We expect to introduce more project-specific permissions features in the future.

5.4 Virtual Machines

5.5 Physical Machines

Users of PhantomNet may get exclusive, root-level control over physical machines. When allocated this way, no layers of virtualization or indirection get in the way of the way of performance, and users can be sure that no other users have access to the machines at the same time. This is an ideal situation for repeatable research.

Physical machines are re-imaged between users, so you can be sure that your physical machines don’t have any state left around from the previous user. You can find descriptions of the hardware in PhantomNet’s clusters in the hardware chapter.